The TD100 Top Dresser is easy to service:
The TD100 Top Dresser requires one BM20608 auxiliary hydraulic kit for use on a ProGator™ Heavy-Duty Utility Vehicle.
The full-width metering gate controls the amount of material distributed:
The hopper is made from galvanized steel to resist corrosion and is supported by steel-frame members for strength. A fixed-speed, nylon/polyester cord, endless conveyor belt moves material under the metering gate and through a rotating brush for even distribution.
The conveyor belt and rotating brush are powered by a hydraulic motor, which operates off the ProGator™ hydraulic system.
Number 40 roller chain is used to transmit power from the hydraulic motor to the conveyor belt and rotating brush.
|Rated capacity||Maximum: 680 kg|
leveled: 0.35 m3
12 cu ft
heaped: 0.54 m3
19 cu ft
|Size||Top: 146x91 cm|
Bottom: 146x61 cm
Depth: 40.6 cm
|Spread width||142 cm|
|Material||Nylon/polyester cord, textured, rubber coating|
|Speed of rotation||190 (motor at 44) rpm|
|Type||Fixed-speed belt, adjustable metering gate|
|Metering gate adjustment||Infinite: 0-7.62 height cm|
0-3 height in.
|Controls||Two hand levers; one to adjust, one to lock|
|Drive||Hydraulic motor powered by ProGator hydraulic system based on engine rpm; #40 o-ring sealed roller chain; controlled by ProGator auxiliary hydraulic control operated from the driver's seat|
|Lift||Controlled by ProGator auxiliary hydraulic control operated from the driver's seat|
|Mounting to ProGator||Two pins at rear, one pin on lift cylinder|
|Overall height (mounted on vehicle)||129.5 cm|
|Shipping weight||367 kg|
|Net weight (empty)||311 kg|
© 2020, RDO Equipment Co. All Rights Reserved.