Process wood waste more efficiently with the HG6000TX horizontal grinder. Self-propels into the most remote jobsites on 20”/51 cm or 24”/61 cm double grouser track pads. High ground clearance and sealed rollers help keep material from building up in the track system. State-of-the-art wireless remote lets you operate the machine from up to 300’/91.4 m away. An optional discharge blower system distributes processed wood over a large area or can fill a covered trailer from the rear end.
Maximum Length - Transport | 37.3 ' | 11.4 m |
Maximum Length - Transport with Dolly | 45.8 ' | 14 m |
Maximum Length (Operation) | 54.5 ' | 16.6 m |
Maximum Width Transport - with Dolly | 9.8 ' | 3 m |
Maximum Height Transport with Dolly | 154.8 " | 393.2 cm |
Weight | 75000 lbs | 34019.4 kg |
Tongue Weight - Engine Option 1 with Dolly | 37590 lbs | 17050.5 kg |
Axle Weight - Engine Option 1 with Dolly | 48910 lbs | 22185.2 kg |
Dolly Weight | 9500 lbs | 4309.1 kg |
Make and Model | Caterpillar C18 Tier 4F (Stage IVB) | |
Number of Cylinders | 6 | |
Gross Horsepower (Maximum) | 755 hp | 563 kw |
Torque (Max) | 2582 ft-lb | 3500.7 Nm |
Fuel Tank Capacity | 350 gal | 1324.9 L |
Max Fuel Consumption | 38.3 gph | 145 lph |
Fuel Type | Ultra-low sulfur diesel (<15 ppm) | |
Air Cleaner | Dry-type with primary and secondary elements and restriction indicator | |
Oil Filter | Full-flow, spin-on | |
Recommended Oil | API CJ-4, 15W-40 | |
Oil Volume with Filter | 36 qt | 34.1 L |
Cooling Medium | Liquid | |
Coolant Capacity (Engine and Radiator) | 22.6 gal | 85.6 L |
Alternator | 24 Volt | |
Fan | (Qty 2) Hydraulically driven, reversible | |
Clutch Type | Hydraulic-operated wet clutch with PTO | |
Clutch Engagement | Push-button | |
Drive Belt Type | Synchronous, carbon fiber |
Make and Model | Caterpillar C18 Tier 4i (Stage IIIB) | |
Number of Cylinders | 6 | |
Gross Horsepower (Maximum) | 755 hp | 563 kw |
Torque (Max) | 2582 ft-lb | 3500.7 Nm |
Fuel Tank Capacity | 350 gal | 1324.9 L |
Max Fuel Consumption | 39.5 gph | 149.5 lph |
Fuel Type | Ultra-low sulfur diesel (<15 ppm) | |
Air Cleaner | Dry-type with primary and secondary elements and restriction indicator | |
Oil Filter | Full-flow, spin-on | |
Recommended Oil | API CJ-4, 15W-40 | |
Oil Volume with Filter | 36 qt | 34.1 L |
Cooling Medium | Liquid | |
Coolant Capacity (Engine and Radiator) | 22.6 gal | 85.6 L |
Air to Boil Temperature | 118 deg | |
Alternator | 24 Volt | |
Fan | (Qty 2) Hydraulically driven, reversible | |
Clutch Type | Hydraulic operated wet clutch with PTO | |
Clutch Engagement | Push-button | |
Drive Belt Type | Synchronous, carbon fiber | |
Sound Power | 119.8 dB(A) - deluxe exhaust system (Exhaust option 2 move to engine option one |
Make and Model | Caterpillar C18 Tier 3 | |
Number of Cylinders | 6 | |
Gross Horsepower (Maximum) | 630 hp | 469.8 kw |
Torque (Max) | 2041 ft-lb | 2767.2 Nm |
Fuel Tank Capacity | 350 gal | 1324.9 L |
Max Fuel Consumption | 34.6 gph | 131 lph |
Fuel Type | Diesel | |
Air Cleaner | Dry-type with primary and secondary elements and restriction indicator | |
Oil Filter | Full-flow, spin-on | |
Recommended Oil | API CJ-4, Viscosity dependent on startup temperature | |
Oil Volume with Filter | 36 qt | 34.1 L |
Cooling Medium | Liquid | |
Coolant Capacity (Engine and Radiator) | 21.3 gal | 80.6 L |
Alternator | 24 Volt | |
Fan | (Qty 2) Hydraulically driven, reversible | |
Clutch Type | Hydraulic operated wet clutch with PTO | |
Clutch Engagement | Push button | |
Drive Belt Type | Synchronous, carbon fiber | |
Sound Power | 119.8 dB(A) - Deluxe exhaust system |
Thrown Object Deflector | Standard | |
Deflector Position | Variable |
Millbox Opening | 60" W x 32" H (152.4 cm W x 81.3 cm H) | |
Drum Diameter | 28 " | 71.1 cm |
Tip Diameter | 36.4 " | 92.5 cm |
Drum Cutting Width | 62.4 " | 158.5 cm |
Drum Skin Thickness | 1.5 " | 3.8 cm |
Drum Speed | 1086 rpm | |
Bearing Type | Double row, spherical roller | |
Bearing - Inner Race Diameter | 5.5 " | 14 cm |
Number of Hammers | 10 | |
Number of Tips | 20 | |
Center Retention Pin Dimensions | 2" diameter x 75.3" L (5.1 cm diameter x 191.3 cm L) |
Millbox Opening | 60 | |
Drum Diameter | 34.3 " | 87.1 cm |
Drum Cutting Width | 63 " | 160 cm |
Drum Skin Thickness | 1.5 " | 3.8 cm |
Drum Speed | 683 rpm | |
Bearing Type | Spherical | |
Bearing - Inner Race Diameter | 5.5 " | 14 cm |
Screen Weight | 470 lbs | 213.2 kg |
Screen Dimensions | 3/4" (1.9 cm) thick | |
Screen Type | Fabricated out of abrasion resistant steel | |
Number of Screens | 2 | |
Screen Area | 3317 sq in | 21400 sq cm |
Number of Sides | 1 | |
Millbox Lid Liner Dimensions | Abrasion resistant steel | |
Liner Dimensions | 1" thick x 5.6" W x 65.4" L (2.5 cm thick x 14.2 cm W x 166.1 cm L) | |
Anvil Type | Fabricated steel with replaceable wear surfaces | |
Anvil Dimensions | 22.8"x 4.1"x 80.8" (57.9 cm x 10.4 cm x 205.2 cm) |
Length | 81.3 ' | 24.8 m |
Width | 48 " | 121.9 cm |
Belt Design | 3 ply - 330# or straight warp single ply 330# both with V cleat | |
Splice | R2-stainless steel or Super splice | |
Return Roller Quantity | 4 | |
Idler Roller Diameter | 12 " | 30.5 cm |
Idler Roller Bearing | 1-15/16, 4-bolt flange | |
Standard Drive Roller Diameter | 12.8 " | 32.5 cm |
Magnetic Drive Roller Diameter | 12.8 " | 32.5 cm |
Drive Motor | Fixed displacement, geroler | |
Drive Motor Bearings | 1-15/16, 4-bolt flange | |
Belt Speed | 780 ft/min | 237.7 m/min |
Load Height | 14 ' | 4.3 m |
Tank capacity | 100 gal | 378.5 L |
Recommended Oil | Vermeer HyPower 68 | |
Filtration Method | Dual in-tank return filters with suction strainer | |
Number of Coolers | 2 (Implement/Track) |
System Type | Open-loop, pressure- and flow-compensated | |
Pump Type | Variable displacement, axial piston | |
Pump Flow at Maximum RPM | 32.4 | |
System Relief Pressure | 4500 psi |
System Type | Open-loop | |
Pump Type | Fixed displacement, gear pump | |
Pump Flow at Maximum RPM | 25.7 gpm | 97.3 L/min |
System Relief Pressure | 3000 | |
Motor Series | Char-Lyn 6000 Series, geroler |
System Type | Open-loop, pressure- and flow-compensated | |
Pump Type | Variable displacement, axial piston | |
Pump Flow at Maximum RPM | 36.2 gpm | 137 L/min |
Motor Series | Radiator-Permco M197 Series; CAC-Turolla OCG SNM2 Series | |
Fan Series - FWD/REV | Reversible |
Tank capacity | 18 gal | 68.1 L |
Recommended Oil | VMF Gold | |
Filtration Method | Spin-on, pressure filter, B6 = 1000 | |
Number of Coolers | 1 | |
System Type | Open-loop | |
Pump Type | Fixed displacement, gear pump | |
Pump Flow at Maximum RPM | 12.4 gpm | 46.9 L/min |
System relief pressure | 260 psi | 17.9 bar |
System Voltage | 24 Volt | |
Battery | Group 8-D, 1155 CCA (Qty 2) | |
System Protection | Fused |
Display Type | LCD | |
Engine Information | Yes | |
Machine Information | Yes | |
Operational Faults | Yes | |
Gauges | Two, fuel level and hydraulic pressure | |
Switches | Moisture-proof, toggle style |
Display Type | LCD | |
Engine Information | Yes | |
Machine Information | Yes | |
Operational Faults | Yes | |
Switches | Sealed membrane | |
Operating Range | Up to 300' (91.4 m) | |
Battery Type | AA (qty 6) | |
Channel Setting | 50 channels |
Frame Description | Unit body construction | |
Tongue Description | Bolt-on to infeed structure | |
Hitch Type | Fifth wheel | |
Fender Description | Optional bolt-on formed steel | |
Brake Type | Air-actuated with spring-applied parking brake | |
Trailer Light Type | 12-24 V LED |
Suspension Type | Air-ride | |
Manufacturer - Option One | Hendrickson | |
Capacity per Axle | 20000 lbs | 9071.8 kg |
Number of Axles | 3 | |
Tires - Option One | 255/70R22.5 Duals | |
Wheels - Option One | 22.5"x 8.3" (57.2 cm x 21 cm) Hub piloted steel | |
Ground Clearance - Option One | 5.3 " | 13.5 cm |
Track Frame Description | Rigid frame with reinforced box section. | |
Track Type | D5 double grouser | |
Track Drive Pump Type | SauerDanfoss Series H1 | |
Track Brake Type | Multidisk parking brake (spring activated) | |
Track Length on Ground | 142" (360.7 cm) | |
Track Width - Option One | 26" (66 cm) | |
Track Width Option One - Ground Bearing Pressure - Hard Ground | 55.6 psi | 383.3 kPa |
Track Width Option One - Ground Bearing Pressure - Soft Ground | 10.2 psi | 70.3 kPa |
Track Width Option Two - Ground Bearing Pressure - Option | 13.2 psi | 91 kPa |
Track Width Option Two - Ground Bearing Pressure - Option Two | 72.2 psi | 497.8 kPa |
Type of Idler | D5 excavator rollers | |
Number of Idlers | 20 | |
Pump Flow at Maximum RPM | 43 gpm | 162.8 L/min |
System relief pressure | 5000 psi | 344.7 bar |
Maximum Speed | 2.6 mph | 4.2 km/h |
Low Speed Travel in Creep Mode | 1 mph | 1.6 km/h |
Air Compressor Brand | Mi-T-M | |
Engine | Honda, 11.7 hp (8.7 kW) | |
Maximum Pressure | 175 psi | 12.1 bar |
Maximum Air Flow | 29 cfm | .8 cmm |
Tank capacity | 30 gal | 113.6 L |
Screens | yes | |
Special Tools Group | yes | |
Extended Warranty | yes | |
Preventative Maintenance | Optional | |
Special Paint | Yes | |
Air Compressor | Optional |
Number of Rings | 10 | |
Tip Diameter with Knife Option One | 36.6 " | 93 cm |
Tip Diameter with Knife Option Two | 36.9 " | 93.7 cm |
Length | 62 " | 157.5 cm |
Number of Knives | 20 | |
Knife Option One | 5/8 " x 3.5 " x 5 " (1.6 cm x 8.9 cm x 12.7 cm) | |
Knife Option Two | 3/4 " x 3.5 " x 5.4 " (1.9 cm x 8.9 cm x 13.8 cm) | |
Useable Edges per Knife | 2 | |
Material | A8 modified chipper steel | |
Number of Bolts/Knife | 2 | |
Bolt Size | 5/8 " - 11 " x 4.5 " (1.6 cm - 27.9 cm x 11.4 cm gr 8) | |
Total Weight of Fuel Chip Attachment (Less Series II Duplex Drum) | 1600 lbs | 725.8 kg |
Number of Replaceable Wear Plates per Ring | 4 |
© 2021, RDO Equipment Co. All Rights Reserved.