Vermeer SC30TX

With a focus on ease-of-operation, the compact design of the SC30TX offers intuitive controls, minimal service points and the performance of a machine that gets the job done. The modified operator presence handle design is now manufactured with a harder exterior to improve wear and appearance. This user-friendly handle system provides additional capacitance sensing capability and is intended to help protect the operator.
  • AutoSweep monitors engine speed and automatically adjusts cutter wheel sweep rate.
  • Ground disturbance is minimized due to long tracks which provide lower ground pressure and improved stability.
Online Brochures
Length 94 " 238.8 cm
Width 35 " 88.9 cm
Height 49 " 124.5 cm
Weight - Engine Option One 1550 lbs 703.1 kg
Make and Model Kohler ECH740
Number of Cylinders 2
Gross Horsepower (Maximum) 25 hp 18.6 kw
Torque (Max) 42 ft-lb 56.9 Nm
Fuel Tank Capacity 6.8 gal 25.7 L
Max Fuel Consumption 2.4 gph 9.1 lph
Fuel Type Gas
Air Cleaner 6 " (15.2 cm) 2-Stage dry
Oil Filter Spin-on
Recommended Oil Kohler oil or API CH4/SJ
Oil Volume with Filter 2 qt 1.9 L
Maximum Angle of Continuous Operation 25 deg
Cooling Medium Air/oil
Cutterwheel Diameter without Teeth 16 " 40.6 cm
Cutterwheel Thickness .5 " 1.3 cm
Cutterwheel Speed 1110 rpm
Cutterwheel Straight Line Dimension 35.5 " 90.2 cm
Cutterwheel Cut Above Ground 25 " 63.5 cm
Cutterwheel Cut Below Ground 12 " 30.5 cm
Tooth Description Yellow Jacket Cutter System
Number of Teeth 16
Number of Indexes 2
Number of Pockets 16
Reversible Pockets Yes
Cutterwheel Guard Yes
Chip Containment 2.2 cu ft .1 cu m
Lower Gearbox Hydraulic motor
Tank capacity 9 gal 34.1 L
Recommended Oil Type ISO 68
System Type Open loop
Filtration Method Inline return filter
Pump Flow at Maximum RPM 16 gpm 60.6 L/min
System relief pressure 2750 psi 189.6 bar
Flow Control Autosweep (option)
Directional Control Standard
Oil Cooler Yes. Fan-cooled
System Voltage 12
Battery 405
Standard Gauges Hour meter/tach
Switches Cutter wheel drive
Controller Yes
Control Station Description Fixed-rear
Track Type Rubber 7 " (17.8 cm) width
Track Width - Retracted 35 " (88.9 cm)
Track Width - Extended 35 " (88.9 cm)
Track Length on Ground 31.4 " (79.7 cm)
Type of Idler Cast
Number of Idlers 5
Track Drive Pump Type Hydrostatic
System Relief Pressure 2900 psi (200 bar)
Pump Flow at Maximum RPM 11.4 gpm (43.1 L/min)
Track Drive Motor Type Geroter
Track Brake Type Hydrostatic
High Speed Travel 3.2 mph 5.1 km/h
Ground Bearing Pressure - Soft Ground 3.4 psi 23.4 kPa
Special Paint Per request
Extended Warranty Per request
Preventive Maintenance Per request