John Deere 2032R Compact Utility Tractor


  • 32 horsepower liquid-cooled diesel engine
  • Drive-over mower decks up to 62 inches
  • Standard 4WD, cruise control, folding ROPS
  • iMatch™ and AutoHitch™ compatible

Features

+ Powerful, high-torque diesel engine delivers superb efficiency

+ Easy-to-use hydrostatic transmission (HST) increases productivity

+ Operator station is comfortable and convenient

+ Optional iMatch™ Quick-Hitch feature allows for easy implement hookup

+ CommandCut™ controls allows quick and accurate height of cut adjustments

+ Excellent serviceability and diagnostics reduce operational cost and improves productivity

+ Increase productivity with standard eThrottle feature



Key Specs

Engine power (gross)23.3 kW
31.2 hp
SAE J1995 rated power
Power take-off (PTO) power18 kW
24.2 hp
Steering hydraulics15 L/min
4 gpm
Implement hydraulics20.2 L/min
5.3 gpm
Hitch typeCategory 1
Lift capacity, 24-in. behind link arms615 kg
1356 lb
Standard transmission; forward/reverseHydrostatic transmission (HST)
Cruise controlStandard
Approximate shipping weight (open-station; cab)1105 kg
2436 lb
Wheelbase172.5 cm
67.9 in.

Engine

FamilyGYDXL1.64NDA
ManufacturerYanmar
Engine model3TNV88C-NJT
Engine power (gross)23.3 kW
31.2 hp
SAE J1995 rated power
Power take-off (PTO) power18 kW
24.2 hp
Rated engine speed2500 rpm
TypeDirect Injection
Injection pump typeDirect Injection
AspirationNatural
Emissions complianceFinal Tier 4
Cylinders/displacement3 / 1.642 L
3 / 100.2 cu in.
Number of cylindersThree
Cylinder linersCast-in-block
Bore and stroke88x90 mm
3.46x3.54 in.
Compression ratio19.1:1
LubricationPressurized
Cooling systemWater pump
Air cleanerDual element
Engine torque at rated speed86 Nm
63.4 lb-ft
Fuel tank capacity32 L
8.5 U.S. gal.

Electrical

Battery size500 CCA
Alternator (12-V)85 amp
Starter size1.4 kW
1.9 hp

Fuel system

TypeDirect Injection
Fuel consumption

Transmission

Standard transmission; forward/reverseHydrostatic transmission (HST)
Optional transmission; forward/reverse
Left-hand reverser
Transmission gear ranges
Final driveBull Gear
BrakesWet disc
SteeringPower steering
Clutch, wet/dry
Clutch disk diameter wet clutch
Axle capacityFront
880 kg
1940 lb
Rear
1089 kg
2400 lb
CreeperNo
Cruise controlStandard
Differential lockYes
Drawbar maximum vertical load

Hydraulics

TypeOpen center
Pump rated outputSteering
15 L/min
4 gpm
Implement
20.2 L/min
5.3 gpm
35.2 L/min
9.3 gpm
Pump typeGear
Maximum operating pressure172.37 bar
2500 psi
Draft control sensingPosition control
Remote control valves availableUp to three

3-point hitch

TypeCategory 1
Lift capacity, 24-in. behind link arms615 kg
1356 lb

Power take-off (PTO)

StandardRear - 540 rpm
Mid - 2000 rpm
Optional
ControlIndependent
ClutchIndependent
Brake (for mid and rear PTO)Wet disc
Engagement method

Fluid capacities

Crankcase with filter4.5 L
4.8 qt
Transmission and hydraulic system

Final drive

TypeSpur Gear
Differential lockYes

Operator station

Rollover protective structureType
Foldable
ASABE S478
Platform - flat/straddleFlat
Gear shift location - console/floorLeft-hand side

Cab

Compliance
Visibility
Air conditioning, temperature differential
Doors
Noise rating
Seat equipment

Dimensions

Wheelbase172.5 cm
67.9 in.
Front axle clearance
Turning radius with brakes2.75 m
9.02 ft
Turning radius without brakes3 m
9.84 ft
Limited slip differential
Approximate shipping weight (open-station; cab)1105 kg
2436 lb

Tires

FrontR1 Ag 7.00-12
R3 Turf 23x8.50-14
R4 Industrial 23x8.50-14
R3 Turf Radial 200/60 R15
RearR1 Ag 12.4-16
R3 Turf 14-17.5
R4 Industrial 14-17.5
R3 Turf Radial 300/70 R20
Front tread range
Rear tread spacing

Miscellaneous

ToolboxYes
Tilt steering wheelYes
12-V OutletYes

Additional information

Date collected