John Deere 9370R Tractor

  • John Deere PowerTech™ PSS 9.0L
  • e18™ PowerShift Transmission
  • CommandView™ III cab
  • Gen 4 CommandCenter™
  • ActiveSeat™ Suspension


+ Standard CommandView™ III cab offers unsurpassed amenities

+ PowerTech™ PSS cooled exhaust gas recirculation (EGR)

+ General maintenance

+ 3-point hitch and CommandCenter™ controls boost productivity

+ JDLink™ services and Service ADVISOR™ diagnostic systems

+ Power take-off (PTO), 1-3/4 1000 rpm

+ e18™ PowerShift™ transmission (PST) with Efficiency Manager™ feature

+ High-flow hydraulics, 435 L/min (115 gpm) system

Official Test

Nebraska Test number 


ManufacturerJohn Deere
Engine familyPowerTech? PSS 9.0L
AspirationDual Series Turbocharger w/fixed geometry first stage-variable geometry second stage - air-to-air aftercooling and cooled exhaust gas recirculation
Cylinders/Displacement, cu. in. (L)9.0 L
548 cu in.
Cylinder LinersWet-sleeve
Fuel tank capacity, US Gal. (L) (Open; Cab)Standard
1173 L
310 U.S. gal.
Underhood muffler 


Advertised PTO hp (kW) @ Rated rpm250 kW
335 hp
Official PTO hp (kW) @ Rated rpm 
Advertised Engine hp (kW) @ Rated speed272 kW
370 hp
Max Unballast Drawbar hp (kW) @ Eng rpm 
Maximum Torque (PTO) @ rpm, lb-ft (Nm) 
Max Torque Rise (80% rtd spd) @ Eng rpm38 percent
Maximum Torque Rise % (PTO) @ Eng rpm 

Fuel Use, U.S. gal./hr & hp hr/gal. at:

PTO @ Rated Eng rpm 
Standard PTO Speed @ Eng speed 
Maximum PTO Power @ Eng rpm 
Maximum Engine Power @ Eng rpm 
Max Unballasted Drawbar Power @ Eng rpm 
75% Load, Full Engine rpm (Unballasted) 
75% Load @ Reduced rpm (Unballasted) 


Std. Transmission; Forward/Reversee18? 18-speed PowerShift 40 kph (25 mph); 18F, 6R with Efficiency Manager?
Opt. Transmission; Forward/Reverse 
On-the-Go Shifting (Yes/No/Partial)Yes
Clutch; Wet/Dry 

Power Take-Off (PTO)

Optional45 mm
1.75 in.
1000 rpm
PTO Speeds @ Engine rpm 
PTO ActuationElectronic


TypeClosed-center, pressure/flow compensated
Pump Rated Output, GPM (L/min.)Standard
220 L/min
58 gpm Optional
435 L/min
115 gpm
Rated Flow @ One SCV, GPM (L/min.)Standard coupler: 132 L/min
35 gpm
12.7 mm
0.5 in.
Optional coupler: 159 L/min
42 gpm
19.0 mm
0.75 in.
Max Output @ SCV Couplers, GPM (L/min.) 
Maximum Operating Pressure, psi (kPa)20,000 kPa
2900 psi
Maximum Hydraulic Power, hp (kW) 
Hitch Draft Control Load Sense TypeElectrohydraulic
Remote Control Valves Available4 - 6 factory, up to 8 field installed
Hitch Category (SAE Designation)4N/Cat. 3, 4N/Cat. 4
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt.Standard
6804 kg
15,000 lb Optional
9072 kg
20,000 lb
6804 kg
15,000 lb
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (SAE) 
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (ASAE) 
Sensing typeElectrohydraulic
Joystick SCV control 

Final Drive

TypeInboard planetary
Differential controlsFull-locking electro hydraulic
AvailabilityFront & Rear
Engage On-the-Go Rear Differential LockYes
Axle TypeSingle reduction
Brakes, Type and ControlHydraulic power, wet disk, self adjusting on front and rear axle

Operator Station

Rollover Protective Structure, OOS 
One - left handSeat Suspension System
Standard: Air
Optional: Active Seat™

2WD Dimensions

Wheelbase, in. (mm) 
Front Tread Range, in. (mm) 
Rear Tread Range, in. (mm) 
Minimum Rear Tread Setting, in. (mm) 
Front Axle Clearance, in. (mm) 
Turning Radius w/Brakes, ft (m) 
Turning Radius w/o Brakes, ft (m) 
Unballasted Operating Weight, lb (kg) 
Approx. Ship Wgt, lb (kg) Open; Cab 

MFWD Dimensions

Wheelbase, in. (mm) 
Front Tread Range, in. (mm) 
Front Axle Clearance, in. (mm) 
Turning Radius w/Brakes, ft (m) 
Turning Radius w/o Brakes, ft (m) 
Limited Slip Differential 
Unballasted Operating Weight, lb (kg) 
Approx. Ship Wgt, lb (kg) Open; Cab 

4WD Dimensions

Wheelbase, in. (mm)3807 mm
149.9 in.
Wheel Tread, Min. to Max. in. (mm) 
Turning Radius w/o Brakes, ft (m)5.55 - Group 47 Tires m
18.2 - Group 47 Tires ft
5.88 - Group 48 Tires m
19.3 - Group 48 Tires ft
Nebraska Test Unballasted w/Duals, lb (kg) 
Unballasted Weight, lb (kg) 

Standard Tires

4WD620/70R46 in. 167A8 R1W radial in dual wheel configuration
Track widths 


Country of ManufactureWaterloo, Iowa, USA
Ballasting Restrictions, lb (kg)Lesser of 22,105 kg
48,700 lb
or Tire Capacity