Maximum power at 1800 rpm | 460 kW 625 PS / 616 hp |
---|---|
Engine | Type PowerTech™ PSS 13.5L Exhaust emission regulation compliancy - Final Tier 4 Displacement 13.5 L 823.8 cu in. Model Europe: 6135HZ021 North America: 6135HZ022 Cylinders Inline 6 |
Fuel system | Unit injectors plus four valves |
Fuel tank capacity | 1,100 L 290.6 U.S. gal. |
Maximum power at 1800 rpm | 460 kW 625 PS / 616 hp |
---|---|
Maximum power at 1900 rpm | |
Rated power at 2100 rpm | 428 kW 582 PS / 574 hp |
Fuel tank capacity | 1100 L 290.6 U.S. gal. |
Manufacturer | John Deere |
---|---|
Type | PowerTech™ PSS 13.5L Exhaust emission regulation compliancy - Final Tier 4 |
Model | Europe: 6135HZ021 North America: 6135HZ022 |
Displacement | 13.5 L 823.8 cu in. |
Cylinders | In line 6 |
Fuel system | Unit injectors plus four valves |
Cooling system capacity | 113 L 29.85 U.S. gal. |
---|---|
Cooling fan drive | Direct |
Ground drive | Prodrive, autoshift transmission, differential lock (automatic and manual), automatic wet brake system Engine rpm on road: 1400-2100 rpm |
---|---|
Hydraulics | Load sensing |
Crop harvesting unit | Harvest channel wide |
Crop flow components | Low-friction crop-flow concept |
Main clutch | Dry clutch |
Number of discs | One disc |
Main driveband | Reinforced with Kevlar inserts |
Belt tensioning | Active, hydraulic pressure |
Main driveband, polybelt belts | Six ribs |
Type/voltage | 12 V |
---|---|
Batteries/battery quantity/capacity | 2 x 174 amp-hr |
Alternator | 200 amp |
Hydraulic system capacity | 50 L 13.2 U.S. gal. |
Type | Prodrive, autoshift transmission, differential lock (automatic and manual), automatic wet brake system |
---|---|
Differential lock | Manual and automatic |
Maximum transport speed | Hydrostatic transmission: 25/30 km/h |
Rear axle type | Hydro-mechanical 4WD |
Automatic wet brake system | Available with ProDrive transmission |
Engine rpm - Management | Standard |
Tilt and extend steering column | Standard |
---|---|
Air conditioning and heater | Standard - ClimaTrak |
Cool box | Optional |
Trainee seat | Standard |
Hectare counter | Standard |
Operator information system | Cornerpost display |
CAN-BUS electronics | Standard |
Operator's seat | Air-suspension seat optional |
Side window wiper | Rear and side window wiper optional Parallel-type windscreen wiper |
Electric adjust and heated | Optional on rear view mirrors |
Rear view mirrors | Standard |
Yield monitoring | Harvest Monitor™ optional |
---|---|
Documentation | Harvest Doc™ optional |
Crop analysis | HarvestLab™ optional |
Length-of-cut control based on crop parameter | Infinitely variable length-of-cut (IVLOC™) standard AutoLOC™ optional - use with HarvestLab |
Satellite (GPS) assisted steering | AutoTrac™ optional |
Header height control | Advanced header control (AHC) optional |
---|---|
Grass pick-ups | 3.0, 4.0, 4.5 m 9.8, 13.1, 14.8 ft |
Maize or corn headers |
Width |
---|
Range | 40 knives: 7-26 mm (0.275-1.0 in.) LOC / 1 mm (0.04 in.) steps / 1100 rpm 48 knives: 6-22 mm (0.24-0.87 in.) LOC / 1 mm (0.04 in.) steps / 1100 rpm 56 knives: 5-19 mm (0.20 - 0.75 in.) LOC / 1 mm (0.04 in.) steps / 1100 rpm 56 knives: 4-17 mm (0.16 - 0.67 in.) LOC / 1 mm (0.04 in.) steps / 1200 rpm 64 knives: 3-15 mm (0.12 - 0.63 in.) LOC / 1 mm (0.04 in.) steps / 1200 rpm 64 knives: 3-16 mm (0.12 - 0.71 in.) LOC / 1 mm (0.04 in.) steps / 1100 rpm |
---|
Feed roll frame opening | Swing away, 37-45 degree (angle) |
---|---|
Number | Four |
Metal detector | Standard Stone detector is optional |
Width, front | 830 mm 32.7 in. |
Standard feed roll drive | Infinitely header drive speed standard |
Optional feed roll drive | Hydro feedroll drive IVLOC |
Type | |
---|---|
Knife drum width | 850 mm 33.5 in. |
Knife drum diameter | 670 mm 26.3 in. |
Speed at rated engine speed | Standard - 1100 rpm Optional - 1200 rpm |
Knife types available (crop) | Straight - grass Curved - corn |
Number of knives | 40 - 48 - 56 - 64 |
Reverse rotation | Yes |
---|---|
Automatic from cab | Yes, remote from cab |
Reverse drive | Standard |
Reverse speed |
Type | John Deere Premium KP, John Deere XStream KP |
---|---|
Quick-change | Quick kernel processor - swing in/swing out |
Maize, roll teeth number (speed differential) | 118 - 32 or 40 percent |
---|---|
Wholecrop, roll teeth number (speed differential) | 178 - 32 or 40 percent |
Sorghum, roll teeth number (speed differential) | 238 - 32 percent |
Weight |
Number of disks (top/bottom) | |
---|---|
Diameter of disks | 240 mm 9.45 in. |
Weight |
Number of blades | 10 |
---|
Rotation, degrees | 210 degree (angle) |
---|---|
Hydraulic height position | Hydraulic raise and lower standard Automatic spout positioning optional |
Double-cap deflection | Standard |
Number of wear liners |
Rotary radiator screen cleaner | Standard |
---|---|
Automatic lubrication system | AutoLube optional |
Engine oil and filter change duration | JD+50™ II oil: 350 hours Other oil: 250 hours |
With front tires | 710/70R42 |
---|---|
With rear tires | 620/60R30 |
Transport length (without header) | 6.6 m 21.7 ft |
Transport width (without header) | 3.1-3.7 m 10.2-12.1 ft |
Transport height (to cab roof) | 3.89 m 12.75 ft |
Working height (maximum) | Height to spout: 6.60 m 21.65 ft |
Approximate weight (without header) |
Standard | Hydrostatic, 3-speed - manual shift with helical gears |
---|
Type | Standard: Hydrostatic, 3-speed - manual shift with helical gears Hydro-mechanical rear axle optional |
---|
Date collected |
---|
© 2021, RDO Equipment Co. All Rights Reserved.