Oil bath tapered roller bearings, sealed with industrial-grade seals, keep maintenance to a minimum and profitable working hours at a maximum. The bearings come complete with a wear plate.
Disk blades on the DH53 Series Offset Disks are available in 71.1-cm, 76.2-cm, or 81.3-cm (28-in., 30-in, or 32-in.) diameter. The weight per blade on these disks ranges from 152.9 kg to 241.8 kg (337 lb to 533 lb) for superior penetration in tough soil conditions.
Only notched disk blades for front and rear are available on the DH53 Series models.
Transport locks are standard, ensuring disk wings are in secure transport mode.
Adjustable disk blade scrapers keep disk blades clean and performing in wet and sticky soils for increased productivity.
A rear hitch is available for operators wanting to pull an additional implement such as a harrow or drag.
End washers help keep the gang shaft end nut tightened during operation, increasing gang wear life.
Two gang nut wrenches are supplied with each unit and securely attached to the unit, ready to use when the gangs need tightening.
The clevis hitch has a durable design and is designed for ease of use, long life, and tough working conditions.
Two separate control arms are standard, one for transport leveling and one for leveling while the disk is in the ground. Once set for a given soil condition, the disk will continue to perform with consistency.
|Ground clearance with base blades||22.9 cm|
|Wheel hub bearings||Dual Tapered Roller Bearings|
|Approximate working width||3 m|
|Maximum penetration||22.9 cm|
|Weight per disk blade||203.7 kg|
|Recommended PTO hp range||105-132 kW|
|Recommended drawbar hp range||89.5-111.9 kW|
|Type||Single Offset Rigid|
|Tube size||15.2x15.2x0.95 cm|
6 x 6 x 3/8 in.
|Front hitch type||Spade|
|Bolt-on rear hitch|
|Type||Notched (front) Notched (rear)|
|Blade concavity||Standard: high|
|Blade option one||711x9.5 mm|
|Blade option two||762x9.5 mm|
|Blade option three||813x9.5 mm|
|Blade option four|
|Blade option five|
|Blade option six|
|Front angle||2 Positions|
|Rear angle||2 Positions|
|Axle size||6.4 cm|
|Axle material||Round Heat Treated Alloy Steel Threaded on Both Ends|
|Bearing type||Oil Bath Tapered Roller|
|Bearing wear plates||Standard|
|Bearing standards||Welded, Reinforced|
|Safety tow chain||Yes|
|Type||Implement - Quantity of 4|
|Size||12.5L x 15 10 ply in.|
|Wheel hub type||8 Bolt|
|Labor hours||2-3 for two people|
|Time period||1 year|
© 2020, RDO Equipment Co. All Rights Reserved.