The next entrant in the S3 generation of drills – the D20x22 S3 – features more power, increased speed, versatility and precise control. The right-powered and right-priced D20x22 S3 makes significant gains in power and speed compared to both competitors and its predecessor – the D16x20 Series II.
By listening closely to the needs of contractors working in congested urban areas, our goal was to make the next S3 drill a perfect fit for your operation — whether you’re installing cable, fiber or product pipe.
With nearly 20,000 lb (89 kN) of thrust and pullback, and a Tier 4 Deutz engine that delivers a 12% increase in horsepower over its predecessor (D16x20 Series II), the D20x22 S3 is the next key addition to your fleet of drills.
Need skilled HDD operators?
|Length (Minimum Transport)||204 "||518.2 cm|
|Width (Minimum Transport)||47.5 "||120.7 cm|
|Height (Minimum Transport)||74 "||188 cm|
|Weight||10850 lbs||4921.5 kg|
|Angle of Approach||18 deg|
|Make and Model||Deutz TD2.9|
|Fuel Type||Low sulfur diesel|
|Maximum Engine RPM||2600 rpm|
|Gross Horsepower||74 hp||55.2 kw|
|Max Fuel Consumption||4.5 gph||17 lph|
|Maximum Operating Angle (Fore/Aft)*||30|
|Maximum Operating Angle (Left/Right)*||30|
|Thrust||19500 lbs||86.7 kN|
|Pullback||19500 lbs||86.7 kN|
|Maximum Carriage Speed at Maximum Engine RPM||167 ft/min||50.9 m/min|
|Maximum Carriage Speed in Low at Maximum Engine RPM||114 ft/min||34.7 m/min|
|Maximum Spindle Torque (Low at Maximum Engine RPM)||2250 ft-lb||3050.6 Nm|
|Maximum Spindle Speed at Max Engine RPM||257 rpm|
|Minimum Bore Diameter||3 "||7.6 cm|
|Maximum Ground Drive Speed at Maximum Engine RPM||3.3 mph||5.3 km/h|
|Automated Rod Loader||Semi-automated|
|Noise Level at Operator's Ear||85.9 dB(A)|
|Guaranteed sound power (CE-rating)||106 dB(A)|
|Drill Rack Angle||17 deg|
|Maximum Flow||25 gpm||94.6 L/min|
|Maximum Pressure||1000 psi||68.9 bar|
|Breakout System||Standard hydraulic vice|
© 2020, RDO Equipment Co. All Rights Reserved.