Our newest S3 drill model — the D60x90 S3 — offers the next generation of power and control. Designed with operator ease and comfort in mind, it is significantly more powerful and quieter than its predecessor — with the interactive Aurora™ digital display to help you get the job done faster and more efficiently.
The D60x90 S3 packs all these valuable benefits into a modest footprint — making it an ideal fit for large commercial or confined urban jobsites.
With up to 60,000 lb (266.9 kN) of thrust and pullback — an impressive 17 hp (13 kW) increase over its previous model (D60x90) — the D60x90 S3 is the drill that will take your operation to a whole new level of productivity.
|Length (Minimum Transport)||354 "||899.2 cm|
|Width (Minimum Transport)||90 "||228.6 cm|
|Height (Minimum Transport)||104 "||264.2 cm|
|Height (With Cab)||104 "||264.2 cm|
|Weight||39000 lbs||17690.1 kg|
|Angle of Approach||18 deg|
|Make and Model||Cat|
|Fuel Type||Ultra Low Sulfur Diesel|
|Maximum Engine RPM||2200 rpm|
|Gross Horsepower||202 hp||150.6 kw|
|Thrust||60000 lbs||266.9 kN|
|Pullback||60000 lbs||266.9 kN|
|Maximum Carriage Speed at Maximum Engine RPM||175 ft/min||53.3 m/min|
|Maximum Carriage Speed in Low at Maximum Engine RPM||55 ft/min||16.8 m/min|
|Maximum Spindle Torque (Low at Maximum Engine RPM)||9250 ft-lb||12541.3 Nm|
|Maximum Spindle Torque (Medium at Maximum Engine RPM)||6810 ft-lb||9233.1 Nm|
|Maximum Spindle Torque (High at Maximum Engine RPM)||3790 ft-lb||5138.6 Nm|
|Maximum Spindle Speed at Max Engine RPM||200 rpm|
|Minimum Bore Diameter||6 "||15.2 cm|
|Maximum Ground Drive Speed at Maximum Engine RPM||3.7 mph||6 km/h|
|Automated Rod Loader||Yes|
|Noise Level at Operator's Ear||83 dB(A)|
|Fuel Tank||90 gal||340.7 L|
|Hydraulic Tank||75 gal||283.9 L|
|Hydraulic System||100 gal||378.5 L|
|Maximum Flow||150 gpm||567.8 L/min|
|Maximum Pressure||900 psi||62.1 bar|
|Breakout System||Open top Vise|
|Stakedown System||Two Options|
© 2020, RDO Equipment Co. All Rights Reserved.