John Deere 220R Loader


  • Compatible with 2032R and 2038R tractors
  • Quik-Park™ mounting system for easy on, easy off in minutes
  • Optional single-point hydraulic coupler lets you connect the hydraulics in one click, no fuss and no mess
  • Quik-Change bucket system allows fast attachment changeovers for moving from chore to chore

Features

+ End-of-pin lubrication on cylinder and pivot pins allows easy access for servicing grease points

+ Quik-Park™ loader mounting system



Technical drawing

Technical drawingView diagram

Tractor

Model2032R, 2038R
Front tire23x8.50-14 4PR R4
Rear tire14-17.5 6PR R4
Front axle configuration 
Wheelbase1725 mm
68 in.
Pump capacity20.2 L/min
5.3 gpm
Rated pressure17.23 MPa
2499 psi

Loader

Leveling configurationNon-Self Leveling
Bucket used1450 mm
57 in.
Bucket weight88 kg
194 lb
Lift capacity at full heightMeasured at pivot (U)
509 kg
1120 lb Measured at 500 mm ahead of pivot (V)
365 kg
803 lb
Lift capacity at 59 in. (1500 mm)Measured at pivot (W)
589 kg
1296 lb Measured at 500 mm ahead of pivot (X)
445 kg
979 lb
Boom breakout forceMeasured at pivot (Y)
886 kgf
1949 lbf Measured at 500 mm ahead of pivot (Z)
618 kgf
1360 lbf
Bucket rollback force capacityAt maximum height (VV)
1044 kgf
2297 lbf At 59-in. (1500-mm) lift height (XX)
1302 kgf
2864 lbf At ground-level line (ZZ)
972 kgf
2138 lbf
DimensionsMaximum lift height (A)
2160 mm
85 in. At full height - bucket level(B)
1999 mm
79 in. At full height - bucket dumped (C)
1667 mm
66 in.
Overall length (I+F), ft (m)3076 mm
121 in.
Overall height in carry position (J) 
Digging depth (H)149 mm
6 in.
ReachAt maximum height (D)
756 mm
30 in. At ground level - bucket level (F)
1351 mm
51 in.
Bucket angleDump angle, degrees (E)
36 degree (angle)Rollback angle, degrees (G)
34 degree (angle)Dump angle, ground
115 degree (angle)
Cycle timesLoader raise, seconds
3.19 secondsLoader lower, seconds
1.94 secondsBucket dump, seconds
4.76 secondsBucket rollback, seconds
2.91 seconds

Additional information

Date collected