John Deere 630 Mower-Conditioner

  • Urethane roll conditioner available
  • Cutting platform is gear-driven
  • Adjustable gauge shoes
  • Flotation tires


+ Clevis hitch

+ Equal-angle hitch

+ Swivel hitch

+ Rotary disk cutterbar

+ Modular-design cutterbar

+ Impeller conditioner

+ Urethane roll conditioner available

+ Windrow formation

+ V10 steel roll conditioner

+ Wide swath kit

Power requirements

PTO speed540 or 1,000 rpm
HP 540 rpm PTO 
HP 1000 rpm 1-3/8 in. PTO48-112 kW
65-150 hp
HP 1000 rpm 1-3/4 in. PTO 
Powerline typeDouble-telescoping Grob spline
Hydraulic pressure required13,790 kPa
2,000 psi


TypeJohn Deere
Cutting width3.0 m
9.75 ft
Cutting heightWithout extension: 28 to 98 mm
1.1 to 3.7 in.
Number of disks6
Number of knives12
Disk speed2,650 rpm
Knife tip speed307 km/h
191 mph
Disk driveGear
LubricationHy-Gard oil
Oil reservoir capacity7 L
7.4 qt
Cutterbar oil checkDrain plug
Cutterbar angleAdjustable
Angle adjustmentMechanical or hydraulic
Angle range 
Cutterbar protectionShearhub
Adjustable gauge shoesYes


1,854 mm
73 in. Diameter
594 mm
23.4 in. Number of V-tines
45 Number of speeds
3-V powerband belt and sheaves Conditioner hood
Infinite adjust, single hand crank
1,854 mm
73 in. Diameter
254 mm
10 in. Type of material
Urethane Design
Recessed cleat Speed
664 rpm Drive
Telescoping shaft

Tractor hookup

Standard hitchClevis
Ball joint equal angle hitchOptional
Rockshaft swivel hitchOptional
Drawbar swivel hitch 


Overall widthTransport
3 m
9.75 ft
Overall lengthConventional transport
With equal angle tongue: 6.2 m
20.5 ft
WeightWith urethane roll conditioner
2,273 kg
5,012 lb With impeller conditioner
2,130 kg
4,696 lb
Standard tires11L-15 standard
31x13.5L 15 optional


Are wrenches required for adjusting?Roll pressure
Yes - Roll spacing

Additional information

Date collected