John Deere 8370R Tractor

  • 370 Engine hp
  • John Deere PowerTech™ 9.0L PSS
  • Choice of 16-speed PowerShift, e23™ PowerShift, or Infinitely Variable Transmission (IVT™)
  • MFWD, or Independent Link Suspension (ILS™)


+ Lighting packages provide 360 degrees of coverage for maximum productivity

+ ActiveCommand steering (ACS™) provides a robust and full-encompassing steering system

+ Independent-Link Suspension (ILS™) utilizes industry-leading technology

+ Hydraulic pump options to meet varying flow requirements

+ Standard CommandView™ III cab offers unsurpassed amenities

+ Tire options for 8R Series Tractors

+ Rear power take-off (PTO) options

+ ActiveSeat™ seat utilizes electrohydraulic technology with air suspension

+ Take advantage of the Generation 4 CommandCenter™, designed for efficiency

Official Test

Nebraska Test number TBD Nebraska Test


Manufacturer John Deere
Engine family 9.0L: EJDXL09.0301
Aspiration Dual turbochargers, variable geometry turbo with fixed geometry turbo in series
Cylinders/Displacement, cu. in. (L) 6 cylinders/9.0 L
549 cu in.
Cylinder Liners Wet
Fuel tank capacity, US Gal. (L) (Open; Cab) Standard
With G47/48 tires: 645 L
170.4 U.S. gal.
With G49 tires: 686 L
181.2 U.S. gal.
Underhood muffler  


Advertised PTO hp (kW) @ Rated rpm At 2100 per SAE: 233 kW
313 hp
Official PTO hp (kW) @ Rated rpm  
Advertised Engine hp (kW) @ Rated speed At 2100 per 97/68EC PS: 272 kW
370 hp
Max Unballast Drawbar hp (kW) @ Eng rpm  
Maximum Torque (PTO) @ rpm, lb-ft (Nm)  
Max Torque Rise (80% rtd spd) @ Eng rpm  
Maximum Torque Rise % (PTO) @ Eng rpm  

Fuel Use, U.S. gal./hr & hp hr/gal. at:

PTO @ Rated Eng rpm  
Standard PTO Speed @ Eng speed  
Maximum PTO Power @ Eng rpm  
Maximum Engine Power @ Eng rpm  
Max Unballasted Drawbar Power @ Eng rpm  
75% Load, Full Engine rpm (Unballasted)  
75% Load @ Reduced rpm (Unballasted)  


Std. Transmission; Forward/Reverse IVT (42) km/h
Opt. Transmission; Forward/Reverse e23; 23/11 (42 or 50) km/h
IVT (50) km/h
Reverse Left-hand or Right-hand
On-the-Go Shifting (Yes/No/Partial) Yes
Clutch; Wet/Dry Wet
Creeper IVT

Power Take-Off (PTO)

Standard 45 mm
1.75 in.
20 spline, 1000 rpm
Optional in-cab shiftable: 45 mm
1.75 in.
20 spline, 1000 rpm
1000E economy rpm
PTO Speeds @ Engine rpm IVT: 1000 PTO rpm @ 2000 engine rpm, 1000 ECO PTO @ 1594 engine rpm, and 540 PTO rpm @ 1814 engine rpm
e23: 1000 PTO rpm @ 1995 engine rpm, 1000 ECO PTO @ 1590 engine rpm, and 540 PTO rpm @ 1810 engine rpm
PTO Actuation Electrohydraulic


Type Closed-center, pressure/flow compensated
Pump Rated Output, GPM (L/min.) Standard
227.1 L/min
60 gpm Optional
321 L/min
85 gpm
Rated Flow @ One SCV, GPM (L/min.) Rear: 0.5 in.
SCV: 132 L/min
35 gpm
Rear: 0.75 in.
SCV: 153 L/min
40.5 gpm
Front SCV: 96 L/min
25 gpm
Max Output @ SCV Couplers, GPM (L/min.)  
Maximum Operating Pressure, psi (kPa) 20,400 (+ or - 300) kPa
2958 psi
Maximum Hydraulic Power, hp (kW)  
Hitch Draft Control Load Sense Type Electronic
Remote Control Valves Available Standard: four
Optional: five or six
2 Front SCV option
Hitch Category (SAE Designation) Cat 4N/3
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. Standard
Cat 4N/3: 9072 kg
Cat 4N/3: 20,000 lb Optional
Cat 4N/3: 6,803 kg
Cat 4N/3: 15,000 lb
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (SAE)  
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (ASAE)  
Sensing type Electrohydraulic
Joystick SCV control Electrohydraulic optional

Final Drive

Type Inboard planetary
Differential controls Electrohydraulic
Availability Front
YesFront & Rear
Engage On-the-Go Rear Differential Lock Yes
Axle Type Bar axle, rack and pinion
Brakes, Type and Control Hydraulic wet disc

Operator Station

Rollover Protective Structure, OOS Gearshift Location - Console/Floor
Cab Doors
Left-hand Platform - Flat/Straddle
FlatSeat Suspension System
Standard: air
Optional: Active Seat
Optional: Cab suspension with Air Seat

2WD Dimensions

Wheelbase, in. (mm)  
Front Tread Range, in. (mm)  
Rear Tread Range, in. (mm)  
Minimum Rear Tread Setting, in. (mm)  
Front Axle Clearance, in. (mm)  
Turning Radius w/Brakes, ft (m)  
Turning Radius w/o Brakes, ft (m)  
Unballasted Operating Weight, lb (kg)  
Approx. Ship Wgt, lb (kg) Open; Cab ILS/IVT with 625-kg (1378-lb) inner weights,front weight support, Cat4 hitch with QC, 113.6 L (30 gal.) fuel, 480/80R50 rear duals, 420/85R34 front duals:
15,009 kg
33,091 lb

MFWD Dimensions

Wheelbase, in. (mm) MFWD: 3080 mm
121.3 in.
ILS: 3050 mm
120.1 in.
Front Tread Range, in. (mm) 1500 MFWD/ILS: 1524-3657 mm
60-144 in.
Front Axle Clearance, in. (mm) MFWD: 686 mm
27 in.
ILS: 590 mm
23.2 in.
Turning Radius w/Brakes, ft (m)  
Turning Radius w/o Brakes, ft (m)  
Limited Slip Differential Hydraulic lock differential
Unballasted Operating Weight, lb (kg)  
Approx. Ship Wgt, lb (kg) Open; Cab ILS/IVT with: inner weights: 625 kg
1378 lb
Front weight support/Cat4 hitch with QC/Fuel 113.6 L
30 gal.
480/80R50 duals/420/85R34 front duals
14,828 kg
32,691 lb

4WD Dimensions

Wheelbase, in. (mm)  
Wheel Tread, Min. to Max. in. (mm)  
Turning Radius w/o Brakes, ft (m)  
Nebraska Test Unballasted w/Duals, lb (kg)  
Unballasted Weight, lb (kg)  

Standard Tires

MFWD Front
Track widths  


Country of Manufacture Waterloo, IA USA
Ballasting Restrictions, lb (kg) Refer to operator's manual