Engine Manufacturer | John Deere |
---|---|
Engine Model | 6090H |
Displacement, ltr (Inches³) | 9 (549) |
Rated Speed, rpm | 2000 |
Engine Output, kW (hp) | 213 (286) |
Engine Torque, Nm (lbf / ft) | 1270 (937) |
Carrier Rollers - Each Side | 2 |
Track Rollers - Each Side | 10 |
Track Shoe Width, mm (inches) | 610 (24) |
Height Over Cab, mm (ft/in) | 4030 (13 ft 3 in) |
---|---|
Width, mm (ft/in) | 3330 (10 ft 11 in) |
Overall Track Length, mm (ft/in) | 4900 (16 ft 1 in) |
Track Length On Ground, mm (ft/in) | 3810 (12 ft 6 in) |
Tailswing Radius, mm (ft/in) | 3050 (10 ft ) |
Ground Clearance, mm (ft/in) | 747 (2 ft 5 in) |
Superstructure Width, mm (ft/in) | 3200 (10 ft 6 in) |
Slewing Angle, ° | 360 |
Cab Leveling tilt (Forward), ° | 26 |
Cab Leveling tilt (Rear), ° | 7 |
Cab Leveling tilt (Side), ± ° | 7 |
Fuel Tank, ltr (gallons (US)) | 1080 (285) |
---|---|
Number of Alternators | 1 |
Alternator Output, Amp | 100 |
Slew Speed, rpm | 4.8 |
---|---|
Travel Speed, kph (mph) | 4.2 (2.6) |
Reference Harvesting Head | Waratah HTH624C |
Felling Diameter, mm (inches) | 810 (32) |
Delimbing Diameter, mm (inches) | 760 (30) |
Delimbing Feed Rate, m/sec (ft/sec) | 3.7 (12.1) |
Cutting Radius - Maximum, mm (ft/in) | 9120 (29 ft 11 in) |
Cutting Radius - Minimum, mm (ft/in) | 3680 (12 ft 1 in) |
Cutting Swath Horizontal, mm (ft/in) | 5440 (17 ft 10 in) |
System Voltage, V | 24 |
Main Pump | Var. piston |
Pump Flow, lt/min (gallons (US) / min) | 494 (131) |
Operating Weight, kg (lbs) | 39876 (87970) |
---|---|
Weight - With Reference Head, kg (lbs) | 39876 (87970) |
Weight - Without Reference Head, kg (lbs) | 36490 (80460) |
© 2021, RDO Equipment Co. All Rights Reserved.