John Deere 9620R Tractor


  • Cummins QSX 15L
  • e18™ PowerShift Transmission
  • CommandView™ III Cab
  • Gen 4 CommandCenter™
  • HydraCushion™ Suspension

Features

+ Cummins® QSX15 (15-L [912 cu in] displacement) engine

+ Standard CommandView™ III cab offers unsurpassed amenities

+ e18™ PowerShift™ transmission (PST) with Efficiency Manager™ feature

+ JDLink™ services and Service ADVISOR™ diagnostic systems

+ Power take-off (PTO), 1-3/4 1000 rpm

+ 3-point hitch and CommandCenter™ controls boost productivity

+ High-flow hydraulics, 435 L/min (115 gpm) system

+ General maintenance

+ Seeding hydraulic Intelligent Power Management (IPM) with three 1.9-cm (3/4-in.) and five 1.3-cm (1/2-in.) selective control valves (SCVs) for 9620R and 9620RX



Key Specs

Engine descriptionCummins QSX15 (B20 diesel compatible)
Engine displacement14.9 L
912 cu in.
Rated engine power456 kW
620 hp
Rated PTO power (hp SAE)249 kW
335 hp
Transmission typeStandard: John Deere e18™ 18-speed PowerShift with Efficiency Manager™: 40 km/h
25 mph
Hydraulic system type
Hydraulic pump rated outputStandard: 220 L/min
58 gpm
Optional: 435 L/min
115 gpm
Rear hitch category (SAE designation)Category 4N/4: 6,804 kg
15,000 lb
Category 4N/4: 9,072 kg
20,000 lb
Base machine weight19,690 kg
43,420 lb

Engine specifications

DescriptionCummins QSX15 (B20 diesel compatible)
Engine typeDiesel, in-line, 6-cylinder, wet-sleeve cylinder liners with 4 valves-in-head
Engine family
Rated speed2,100 rpm
AspirationSingle Variable geometry turbocharger with air-to-air aftercooling and cooled exhaust gas recirculation
Cylinders liners
Emission levelFinal Tier 4
After treatment typeDOC/DPF/SCR
Displacement14.9 L
912 cu in.

Engine performance

Rated power456 kW
620 hp
Rated PTO power (hp SAE)249 kW
335 hp
Power boost (available in transport and/or mobile PTO applications)8 percent
Engine peak torqueAt 1600 rpm: 2800 Nm
380 lb-ft
PTO torque rise36 percent

Transmission

TypeStandard: John Deere e18™ 18-speed PowerShift with Efficiency Manager™: 40 km/h
25 mph
Reverser
Clutch; wet/dry
Creeper

Hydraulic system

Type
Pump rated outputStandard: 220 L/min
58 gpm
Optional: 435 L/min
115 gpm
Available flow at a single rear SCV0.5 in. couplers: 132 L/min
35 gpm
Available flow at front SCVs
Number of rear selective control valves (SCVs)Standard: ISO Couplers: 4-6
Optional: ISO Couplers: 7-8 (field installed)
Number of mid selective control valves (SCVs)
Number of front selective control valves (SCVs)
Joystick SCV control
SCV controlElectronic

Rear hitch

Hitch draft control load sense type
Remote control valves available
Hitch category (SAE designation)Category 4N/4: 6,804 kg
15,000 lb
Category 4N/4: 9,072 kg
20,000 lb
Maximum lift capacity behind lift pointsCategory 4N/4: 9,072 kg
20,000 lb
Sensing typeElectrohydraulic with draft sensing
Rear axle differential lock

Drawbar

Drawbar categoryCategory 5
Maximum vertical load5,440 kg
12,000 lb

Rear power take-off (PTO)

TypeIndependent
44 mm (1.75 in.) 20-spline, 1,000 rpm
Engine rpm (at rated PTO speeds)
PTO actuation

Front hitch

Category
Electric power
Standard lift capacity
Front power take-off (PTO)
PTO speed

Rear axle

TypeStandard: Diameter: 120 x 3,048 mm
4.72 x 120 in.
Final drive typeInboard planetary with double-reduction axle
Differential controls
Axle type
Brakes, type and control
Rear differential lockFull-locking electrohydraulic

Front axle

TypeDiameter: 120 x 3,048 mm
4.72 x 120 in.
Front axle differential lockFull-locking electrohydraulic

Standard Tires

Front
Rear
Wheel tread range
Turning radius with brakes
Turning radius without brakesGroup 47 tires: 6,035 mm
19.8 ft

Steering

TypeStandard: Hydraulic power-steering
Optional: ActiveCommand™ Steering (ACS)

Electrical system

Alternator sizeStandard: 200 amp
Optional: 240 amp
Battery options12 V
Total cold cranking amps925 CCA

Operator station

Rollover protective structure, OOS

SeatStandard: ComfortCommand™
Optional: ActiveSeat™
Cab suspension
Instructional seatStandard
DisplayStandard: 4100 Generation 4 CommandCenter™ with 7 in. display
Optional: 4600 Generation 4 CommandCenter™ with 10 in. display
RadioStandard: AM/FM stereo with weatherband, remote controls, auxiliary input jack, four speakers and external antenna
Inner cab volume3.597 m3
127 cu ft
dB(A) rating
Cab glass area6.52 m2
70.18 sq ft

Dimensions

Wheelbase3,912 mm
154 in.
Overall lengthWith front weights, excluding hitch and coupler: 7,697 mm
303 in.
With front weights, including hitch and coupler: 8,416 mm
331.3 in.
Drawbar clearanceGroup 48 tires: 419.1 mm
16.5 in.
Front axle center
Approximate shipping wheight, Open;Cab19,690 kg
43,420 lb

Weight

Base machine weight

19,690 kg
43,420 lb
Maximum ballast level27,216 kg
60,000 lb
Maximum permissible weight

Capacities

Crankcase oil volume43.5 L
11.5 U.S. gal.
Fuel tank1,514 L
400 U.S. gal.
Diesel Exhaust Fluid (DEF) tank83 L
22 U.S. gal.
Cooling system62 L
16.3 U.S. gal.
Transmission-hydraulic systemWith 3-point hitch and PTO: 227 L
60 U.S. gal.
Without 3-point hitch and PTO: 220 L
58 U.S. gal.

Serviceability

Interval for engine oil change400 hours
Interval for hydraulic/transmission oil change1,500 hours
Interval for engine coolant change6,000 hours

Loaders

Loader
Lift capacity at full height
Maximum lift height

Precision AG

GuidanceAutoTrac™ Ready
TelematicAvailable with JDLink™ hardware, activations, and Ethernet Harnesses (availability dependent upon destination)
Remote diagnosticsAvailable with activated JDLink hardware and activations

Miscellaneous

Country of manufactureUSA

Additional information

Date collected23-May-17