The unique offset head design eliminates cross-pins and cotter pins to retain the pin.
A nut ensures the pins remain in position.
A lubrication groove provides a path for lubrication.
End-of-pin lubrication allows easy access for servicing grease points, which are visible from the side of the loader.
The Quik-Park mounting system on the H120 Loader is designed for easy removal and mounting to and from the tractor without tools.
Similar to that of the H130 and former 200CX Loaders, the H120’s parking stand is attached to the mast. To lower it into the park position, simply move the joystick to the raise position once the latches are opened.
To view a video of how the Quik-Park™ system works click here.
NOTE: This video only shows the dismount and mount of the loader without disconnecting the hydraulics. To completely remove the loader, the operator must turn the tractor off, relieve the hydraulics, and then disconnect the hoses from the couplers.
|Front tire||18x8.5-10 4PR R4|
|Rear tire||26x12.00-12 4PR R4|
|Front axle configuration|
|Pump capacity||3.5 gpm|
|Rated pressure||1987 psi|
|Bucket used||Pin On Materials 1250 mm|
|Bucket weight||51 kg|
|Lift capacity at full height||Measured at pivot (U)|
703 lb Measured at 500 mm ahead of pivot (V)
|Lift capacity at 59 in. (1500 mm)||Measured at pivot (W)|
729 lb Measured at 500 mm ahead of pivot (X)
|Boom breakout force||Measured at pivot (Y)|
1725 lb Measured at 500 mm ahead of pivot (Z)
|Bucket rollback force capacity||At maximum height (VV)|
1682 lb At 59-in. (1500-mm) lift height (XX)
1739 lb At ground-level line (ZZ)
|Dimensions||Maximum lift height (A)|
71.2 in. At full height - bucket level(B)
65.1 in. At full height - bucket dumped (C)
|Overall length (I+F), ft (m)||2.6 m|
|Overall height in carry position (J)|
|Digging depth (H)||-101 mm|
|Reach||At maximum height (D)|
22.5 in. At ground level - bucket level (F)
|Bucket angle||Dump angle, degrees (E)|
-40.1 degree (angle)Rollback angle, degrees (G)
31.2 degree (angle)Dump angle, ground
-114.0 degree (angle)
|Cycle times||Loader raise, seconds|
4.0 seconds Loader lower, seconds
2.5 seconds Bucket dump, seconds
5.7 (without regen)/2.2 (with regen) seconds Bucket rollback, seconds
© 2021, RDO Equipment Co. All Rights Reserved.